48 Coaxial cable set 8m (Energy Premium / Comfort / Comfort Plus) 00004418 The set comprises an 8 m long coaxial cable with pre-fitted connectors at both ends. This set can be used to relocate DucoBox Energy Comfort / Premium antenna, if necessary, to a spot where the RF range is optimal. Connectivity Board Modbus and WIFI 0004810 (Reference to be changed to 00004945 as of Q1 CY25) The optional Duco Connectivity Board can be applied within the DucoBox Energy. This PCB enables interfacing towards home automation and building management systems via REST API (locally or via the cloud) or Modbus TCP (locally). Both are possible via Ethernet or Wi-Fi. Muff with rubber D160/D160 (M/M) [connection piece with joint] 00004724 Muff with rubber D180/D160 (M/M) [connection piece with joint] 00004725 Muff with rubber D180/D180 (M/M) [connection piece with joint] 00004726 Muff with rubber D200/D180 (M/M) [connection piece with joint] 00004727 The connection pieces with rubber are used to make a quick and good connection between ducts (exhaust and/or supply) or between a duct and a DucoBox. Thanks to the pre-fitted rubber seal, an airtightness class of up to D can be guaranteed at the connection! They are available in 4 versions: Ø160/Ø160, Ø160/Ø180, Ø180/Ø180 and Ø180/Ø200... a solution for every situation! Pre-Heater DucoBox Energy Comfort (Plus) - 1,425W 00004807 Pre-Heater DucoBox Energy Comfort (Plus) UK - 1,425W 00004825 The Pre-heater is a frost protection based on an electrical resistance of up to 1,425W that can optionally be applied in the ODA connection of DucoBox Energy Comfort (Plus). The resistance is modulatively controlled based on various temperature readings in the ventilation unit. The heater is attached between the unit and the air duct via connectors. The connectors depend on the type of unit and the flow rate. Refer to the table below for the right combination. Power supply 230VAC-24VDC/20W + housing 00004763 The Duco Power Supply 230VAC-24VDC/20W is the best solution to power Duco Wired components from a central 230V connection. The component comes with a surface-mounted junction box as standard. The sum of the peak power of all connected DUCO components can be 20W at most when using one Power Supply. Duco Wired power adapter 230VAC-24VDC/20W 00004762 The Duco Power Adapter 230VAC-24VDC/20W is the solution to power Duco Wired components from a 230V socket. The sum of the peak power of all connected DUCO components can be 20W at most when using one Power Supply. Flow regulator 15-50 m³/h Ø80 00004722 Flow regulator 15-50 m³/h Ø125 00004836 Flow regulator 50-100 m³/h Ø125 00004837 The adjustable flow regulator is an element that is placed in a duct to obtain a constant flow in a pressure range between 50 and 250 Pascal. It is used for both supply and extraction. Specifically for French market. Type of unit Flow rate 1 Connector 2 Heater 3 Connector 1 2 3 Comfort 325 & D325 Up to 250 m³/h D160/D180 00004725 Pre-Heater 00004807 00004825 D160/D180 00004725 Up to 350 m³/h D180/D180 00004726 D160/D180 00004725 Comfort D400 Comfort Plus D350 Comfort Plus D450 Comfort Plus D550 Up to 250 m³/h D160/D180 00004725 D180/D180 00004726 Up to 350 m³/h D180/D180 00004726 D180/D180 00004726 Up to 550 m³/h D180/D200 00004727 D180/D180 00004726
RkJQdWJsaXNoZXIy MTE0MTkzMg==